View the Firescan D131 Data Sheet

The FireScan™ handheld laser scanner is lightweight and ergonomic and features an enhanced multi-standard architecture. Several models to combine sets of interfaces: USB, RS232, Wedge, Wand, IBM, and TTL. Linear and RSS bar code decoding.

Features:

* Aggressive reading
* Complete Data Editing and Formatting
* Firmware upgrading
* Intuitive barcode aiming
* Ergonomic and lightweight
* RSS-14 decoding capability
* Sunrise 2005 compliant

Accessories

* Stand
* Desk/Wall Holder

MECHANICAL:

Weight: (approx.) 200 g
Case Material: ABS and Polycarbonate
Cable Length: 2 m (6.1 ft) linear or coiled

OPTICAL:

Light Source: Laser diode 630 to 680 nm

Max. Resolution: 0.12 mm (5 mils)

Scan Rate: 35 (±5) scans/sec.

Min. Print Contrast Ratio: PCS = 15%

Reading Angle: Skew: ±60°, Pitch: 5 to 55°, -5 to -55°, Tilt ±20°

Reading Indicators: Laser on and Good Read light, adjustable tone “beeper”

ENVIRONMENTAL

Ambient Light Conditions: Immune to light exposure in offices and facilities, and direct exposure to sunlight

Operating Temperature: 0 to 50 °C

Storage Temperature: -20 to 40 °C

Humidity: 90% non condensing

Drop Resistance: IEC 68-2-32 Test ED; withstands repeated drops from 1.5 m onto a concrete surface

Environmental Protection: IP30

ELECTRICAL:

Power Supply: 5 VDC ±5%

Consumption

* 200 mA max. (FireScan™ D111/D131)
* 180 mA max. (FireScan™ D141)

COMMUNICATIONS:

Programming Method

* Manual Reading: special bar codes
* Automatic (with RS232): S/W commands through the serial port
* DL Sm@rtSet™: Windows configuration program

Enhanced Features: Puzzle Solver™ data editing and data concatenation

Interfaces:

* FireScan™ D111 RS232, IBM46xx
* FireScan™ D131 USB, RS232, Wedge, Wand
* FireScan™ D141 TTL/Laser output

SAFETY & REGULATORY:

Laser Classification: Class 2 (EN60825-1/ CDRH)

View the Firescan D131 Data Sheet