HemaTrax 5.1B Standalone – Replicate Unit ID Set Only

1. In the windows Program Files directory, locate the Digi-Trax Corporation sub-directory and double-click on it. 
2. If no other HemaTrax program is installed, only the HemaTrax Standalone program folder will be listed. Figure below shows multiple HemaTrax applications including the HemaTrax Standalone program.

3. Double-click on the HemaTrax Standalone folder. Figure below shows sub-folders and files associated with the HemaTrax Standalone program.

4. Locate the Format folder and double-click on it. If no replicant Unit ID Set format has been added previously, only one format will be available as shown below.

5. Now save the copy of the FORMAT6M.FMT into the
   C:\Program Files\Digi-Trax Corporation\HemaTrax Standalone\Format folder.
6. Run HemaTrax Standalone program.
7. Click on Setup menu then select and click on the Replicant Unit Id Format item from the drop-down selections.
8. In the Replicant Unit Id Format window, select the FORMAT6M item from the combo box selections then click on the OK button. Note that only two selections will be available from the combo box: FORMAT and FORMAT6M.
9. For Sato CL-412 series printer, adjust the horizontal offset position in the Adjust Position window from the Replicate Unit Id Set window to 3 (in mm). For Zebra Z4M series printer, adjust the horizontal offset position and vertical offset position in the Adjust Position window from the Replicate Unit Id Set window to 1.5 and -1 (in mm) respectively. Print and verify barcode and text positions in the labels -- adjust value if necessary.
10. END OF PROCEDURE.