Single Quadrant Blank Label
2" x 2"Digi-Trax®
Single Quadrant Label
Single quadrant labels can be used for ABO-Rh, Date & Time and Product Information. The label is typically designed for use with a “peel and apply” operation or with a tear bar on the printer. We supply these labels in kits with appropriate ribbons to match your printer.
ISBT-22-Z3-KT
for Zebra ZT, ZM series tabletop printers
Size: 2″ x 2″
Type: Thermal transfer synthetic
Quantity: 2400 per roll, 9 rolls per case, 21,600 labels total
Core: 3″
Ribbon: 3 rolls of: RR#7-6075
ISBT-22-G-KT
For Zebra ZD & G series desktop printers
Size: 2″ x 2″
Type: Thermal transfer synthetic
Quantity: 1200 per roll, 4 rolls per case, 4800 labels total
Core: 1½”
Ribbon: 4 rolls of RR-CT-G2
ISBT-22-3412
for Sato tabletop printers
Size: 2″ x 2″
Type: Thermal transfer synthetic
Quantity: 2400 per roll, 9 rolls per case, 21,600 labels total
Core: 3″
Ribbon: 3 rolls of RR#7S-6075
Digi-Trax® Thermal Transfer Blood Label Specifications
Special care must be taken when applying to any frozen products since the recommended minimum application temperature from adhesive manufacturers is -20°F (-29°C). Once properly applied to an acceptable surface, these labels will remain serviceable from 200ºF (93ºC) to cryogenic temperatures starting at -65°F (–54ºC) (these are the and lower temperature limits per the manufacturer). Testing each individual application is recommended.
Minimum application temp:
-20°F (-29°C)
hand application required
Service temp range:
-65°F to +200°F (-54°C to +93°C)
special handling may be required for use with FFP
Shelf life:
Digi-Trax label material has a standard shelf life of one year from date of shipment from Digi-Trax® when stored at 72°F (22°C) at 50% RH. If exposed to elevated temperatures for an extended period time (more than 30 days), the adhesive properties may be diminished.
Supplies are sold and shipped in “Cases” that have been designed for use with our certified desktop bar code label blood bank printers.
Each “Case” contains a matched quantity of labels and ribbons to eliminate waste.
The synthetic label material has been laboratory tested and matched with special resin ink ribbons to meet rigorous standards required as per the ISBT 128 compliant print specifications. It meets durable print standards set forth in the FDA Guidelines.
The adhesive coating meets FDA; CFR21, Sec. 175.105 requirements for direct and indirect bag applications.
The label and ribbon combination is designed to withstand freezing, water bath, bleach disinfecting and repeated abrasion and will not wrinkle, shred, or smudge. The durable thermal transfer ink image printing will remain legible under these harsh conditions.
All Digi-Trax® thermal transfer blood bank labels feature high initial tack and ultimate adhesion. In addition, our adhesives offer good resistance to U.V., plasticizers and water.
Phone
800-356-6126
Location
650 Heathrow Drive
Lincolnshire, IL 60069
Business Hours
M – F: 8:30 am – 5:00 pm CDT
S – S: Closed