DIN Label Sets
Donation Identification Number Sets 3.74" x 4.5"Digi-Trax “stock” ISBT 128 DIN Label Sets
Donation Identification Number (DIN)
Our standard stock piggyback blank labels are used to image ISBT 128 Donation Identification Number (DIN) label sets. Each label set is 3.74″ x 4.5″ and includes six medium density barcode bag labels, six high density ISBT 128 barcode test tube labels and nine eye readable labels. Medium density bag labels are 1.87″ x 0.75″. Test tube labels are 1.25″ x 0.25″. Eye readable are 1.25″ x 0.25″.
This ISBT 128 DIN label set standard was created by Digi-Trax. Purchasing blank labels for on-demand printing of DIN’s can save you 40% versus the price of pre-printed labels. Our HemaTrax® ISBT 128 labeling software places the critical sequential number under computer control and provides you with audit trail reports for any number of locations. HemaTrax also stores any number of label design configurations.
WBN-ISBT-ZEBRA-C-KT
Fanfold for Zebra ZT, ZM series tabletop printers
Size: 3.74″ x 4.5″
Type: Thermal transfer synthetic
Quantity: 500 per fanfold, 6 fanfolds per case, 3000 labels total
Core: 3″
Ribbon: 1 roll of R-18105389
WBN-ISBT-G-KT
for Zebra ZD & G series desktop printers
Size: 3.74″ x 4.5″
Type: Thermal transfer synthetic
Quantity: 250 per roll, 6 rolls per case, 1500 labels total
Core: 1.5″
Ribbon: 3 rolls of RR-CT-G4
WBN-ISBT SATO*
for Sato tabletop printers
Size: 3.74″ x 4.5″
Type: Thermal transfer synthetic
Quantity: 500 per fanfold, 6 rolls per case, 3000 labels total
Core: 3″
Ribbon: 1 roll of R-18105389
WBN-ISBT-ZEBRA-RL-C-KT
Rolls for Zebra ZT, ZM series tabletop printers
Size: 3.74″ x 4.5″
Type: Thermal transfer synthetic
Quantity: 500 per roll, 6 rolls per case, 3000 labels total
Core: 3″
Ribbon: 1 roll of R-18105389
Digi-Trax® Thermal Transfer Blood Label Specifications
Special care must be taken when applying to any frozen products since the recommended minimum application temperature from adhesive manufacturers is -20°F (-29°C). Once properly applied to an acceptable surface, these labels will remain serviceable from 200ºF (93ºC) to cryogenic temperatures starting at -65°F (–54ºC) (these are the and lower temperature limits per the manufacturer). Testing each individual application is recommended.
Minimum application temp:
-20°F (-29°C)
hand application required
Service temp range:
-65°F to +200°F (-54°C to +93°C)
special handling may be required for use with FFP
Shelf life:
Digi-Trax label material has a standard shelf life of one year from date of shipment from Digi-Trax® when stored at 72°F (22°C) at 50% RH. If exposed to elevated temperatures for an extended period time (more than 30 days), the adhesive properties may be diminished.
Supplies are sold and shipped in “Cases” that have been designed for use with our certified desktop bar code label blood bank printers.
Each “Case” contains a matched quantity of labels and ribbons to eliminate waste.
The synthetic label material has been laboratory tested and matched with special resin ink ribbons to meet rigorous standards required as per the ISBT 128 compliant print specifications. It meets durable print standards set forth in the FDA Guidelines.
The adhesive coating meets FDA; CFR21, Sec. 175.105 requirements for direct and indirect bag applications.
The label and ribbon combination is designed to withstand freezing, water bath, bleach disinfecting and repeated abrasion and will not wrinkle, shred, or smudge. The durable thermal transfer ink image printing will remain legible under these harsh conditions.
All Digi-Trax® thermal transfer blood bank labels feature high initial tack and ultimate adhesion. In addition, our adhesives offer good resistance to U.V., plasticizers and water.
Phone
800-356-6126
Location
650 Heathrow Drive
Lincolnshire, IL 60069
Business Hours
M - F: 8:30 am - 5:00 pm CST
S - S: Closed
Will be used in accordance with our Privacy Policy.
Terms and Conditions